How do I replace my badminton grip?

Replacing a badminton grip is quite easy and can be done in a few simple steps. Here's a general guide to help you:

Necessary materials:

1. New badminton grip
2. Scissors
3. Double sided tape (optional)

Steps:

1. Remove the old grip: Start by completely removing the old grip from the racket handle. Gently pull it off, being careful not to tear it.
2. Preparing the racket: If any residue from the old grip or glue remains on the handle, clean it with a cloth or a little soap and water. Make sure the handle is dry before moving on to the next step.
3. Preparing the new grip: Roll out the new grip and check that it is long enough to cover the entire handle. If necessary, remove any protective film.
4. Attaching the new grip: Starting at the bottom of the handle (on the plastic cap) place the end (narrow end) of the new grip firmly in place. Wrap the grip tightly around the handle as you move upwards. Make sure the grip is applied evenly with no gaps. If you want a slightly thicker grip, make sure to overlap the grip evenly. Hold the grip firmly as you wrap.
5. Finishing: Once you've wrapped the grip up to the top of the handle, cut off the excess with a pair of scissors. Make sure you cover the grip well with the supplied tape, so that it does not come loose while playing.

Optional: For extra security, you can apply a strip of double-sided tape to the handle before applying the new grip. This helps keep the grip in place and prevents it from sliding during play.

That’s it! Now your question: How do I replace my badminton grip? should be answered and you should have a new badminton grip on your racket. Make sure to check the grip regularly and replace it if necessary, as it can wear out or get dirty over time and lose its grip and cause blisters on your hands.

Our range of badminton grips